Building (Product Certification) Amendment Regulations 2025
Building (Product Certification) Amendment Regulations 2025
Building (Product Certification) Amendment Regulations 2025
Checking for alerts... Loading...
2025/168

Building (Product Certification) Amendment Regulations 2025
Rt Hon Dame Helen Winkelmann, Administrator of the Government
Order in Council
At Wellington this 4th day of August 2025
Present:
Her Excellency the Administrator of the Government in Council
These regulations are made under section 402(1) of the Building Act 2004—
(a)
on the advice and with the consent of the Executive Council; and
(b)
on the recommendation of the Minister for Building and Construction.
Regulations
1 Title
These regulations are the Building (Product Certification) Amendment Regulations 2025.
2 Commencement
These regulations come into force on 8 August 2025.
3 Principal regulations
These regulations amend the Building (Product Certification) Regulations 2022.
4 New Part 1 heading inserted
After regulation 4, insert:
Part 1 Product certification scheme set out in sections 261 to 272H of Act
5 Regulation 18 replaced
Replace regulation 18 with:
Part 2 Overseas product certification schemes, etc: sections 272HA to 272HC of Act
Recognition of building products or building methods certified under overseas product certification scheme
18 Criteria that chief executive must be satisfied are met
(1)
For the purposes of section 272HA(2)(a) of the Act, the prescribed criteria that the chief executive must be satisfied the building products or building methods meet are as follows:
(a)
the products or methods are certified under the overseas product certification scheme by a person other than a person whose accreditation as a product certification body is suspended or revoked under section 264 of the Act:
(b)
the products or methods are supported by a certificate that—
(i)
is issued under the overseas product certification scheme and has not expired or been withdrawn; and
(ii)
is equivalent to a product certificate; and
(iii)
is available for persons using the products or methods in New Zealand (New Zealand users); and
(iv)
is in English or accurately translated into, and available for New Zealand users, in English:
(c)
the products or methods are supported by any other information (if necessary in addition to the certificate referred to in paragraph (b)) that is sufficient to enable New Zealand users to understand how to use them and how they will perform for the purposes of the intended use:
(d)
there is sufficient evidence to establish that the products or methods would comply with the building code if—
(i)
the chief executive were to recognise the products or methods under section 272HA(1) of the Act; and
(ii)
a person using the products or methods were to comply with every relevant limitation or condition that the chief executive proposes to impose on the recognition; and
(iii)
the person were to use the products or methods for an intended use identified in a certificate referred to in paragraph (b) (or in other information available to the chief executive) and specified in a limitation or condition that the chief executive proposes to impose on the recognition (other than any use that is excluded by any such limitation or condition):
(e)
no warning about or ban on any of the products or methods is in force under section 26 of the Act:
(f)
no equivalent outside New Zealand to a warning or ban under section 26 of the Act applies to any of the products or methods.
(2)
For the purposes of section 272HA(2)(b) of the Act, the prescribed criterion that the chief executive must be satisfied the overseas product certification scheme meets is that, under the scheme, any organisation that is responsible for certifying the building products or building methods concerned has the relevant features.
(3)
The relevant features are that the organisation—
(a)
has been accredited as meeting appropriate standards by an accreditation body that is independent of that organisation; and
(b)
has robust processes for each of the following:
(i)
evaluating and certifying the building products or building methods:
(ii)
monitoring and evaluating those certifications on an ongoing basis:
(iii)
ensuring that certifiers of the building products or building methods act impartially in certifying those products or methods:
(iv)
ensuring that certifiers of building products act independently from manufacturers and suppliers of those products and independently from each other:
(v)
ensuring that persons who manage or control the organisation carry out that role with integrity and professionalism.
Recognition of standards issued by overseas standards organisations, and standards certification schemes
19 Criteria that Minister must be satisfied are met
Recognition of groups of standards issued by overseas standards organisations
(1)
For the purposes of section 272HB(2)(a) of the Act, the prescribed criteria that the Minister must be satisfied the groups of standards or the part concerned meets are as follows:
(a)
the groups of standards or the part concerned is available, or can be made available, to users in New Zealand:
(b)
the groups of standards or the part concerned—
(i)
is in English; or
(ii)
is accurately translated into, and published by the overseas standards organisation in, English.
(2)
For the purposes of section 272HB(2)(b) of the Act, the prescribed criterion that the Minister must be satisfied the overseas standards organisation meets is that—
(a)
the overseas standards organisation—
(i)
is the International Organization for Standardization; or
(ii)
is the International Electrotechnical Commission; or
(iii)
is a full member of the International Organization for Standardization or of the International Electrotechnical Commission; or
(b)
the overseas standards organisation has robust and transparent processes for developing, maintaining, and publishing standards, and those processes are consistent with internationally recognised good practice relating to standards and include the following:
(i)
processes for ensuring that standards issued by the overseas standards organisation are informed by technical expertise and appropriate consultation with the industry concerned and consumers:
(ii)
processes for ensuring that any persons and organisations engaged in developing standards issued by the overseas standards organisation act impartially and independently:
(iii)
processes for ensuring that standards issued by the overseas standards organisation are reviewed, and updated as necessary, at appropriate and regular intervals.
Recognition of standards certification schemes
(3)
For the purposes of section 272HB(3)(b) of the Act, the prescribed criteria that the Minister must be satisfied the standards certification organisation meets are as follows (but only if the organisation is responsible under the standards certification scheme concerned for assessing building products against standards):
(a)
the standards certification organisation has been accredited as meeting appropriate standards by an accreditation body that is independent of the standards certification organisation:
(b)
the standards certification organisation has robust processes for each of the following:
(i)
assessing whether the building products meet those standards:
(ii)
monitoring and evaluating those assessments on an ongoing basis:
(iii)
ensuring that persons assessing the building products act impartially:
(iv)
ensuring that persons assessing the building products act independently from manufacturers and suppliers of those building products and independently from each other:
(v)
ensuring that any persons who manage or control the organisation carry out that role with integrity and professionalism.
Rachel Hayward,
Clerk of the Executive Council.
Explanatory note
This note is not part of the regulations but is intended to indicate their general effect.
These regulations, which come into force on 8 August 2025, amend the Building (Product Certification) Regulations 2022. These regulations prescribe certain criteria that the relevant decision maker must be satisfied are met before recognising any of the following under section 272HA or 272HB of the Building Act 2004:
building products or building methods that are certified under an overseas product certification scheme:
groups of standards issued by an overseas standards organisation:
standards certification schemes that a standards certification organisation that is based in New Zealand or overseas administers or operates under.
The relevant decision maker for recognising building products or building methods that are certified under an overseas product certification scheme is the chief executive of the Ministry of Business, Innovation, and Employment. The relevant decision maker for recognising groups of standards or standards certification schemes is the Minister for Building and Construction.
Issued under the authority of the Legislation Act 2019.
Date of notification in Gazette: 7 August 2025.
These regulations are administered by the Ministry of Business, Innovation, and Employment.
"Related Legislation
"Related Legislation
"Related Legislation
Versions
Building (Product Certification) Amendment Regulations 2025
Building (Product Certification) Amendment Regulations 2025
More
Building (Product Certification) Amendment Regulations 2025
RSS feed link copied, you can now paste this link into your feed reader.